Ohmalloy Material Co.,Ltd
QUALITY BEST, INTEGRITY FIRST. www.ohmalloy.com
Add to Cart
Boiler Tubes SS 316 wire HRB 90-95 Typical Hardness 70% Deposit Efficiency
PRODUCT OVERVIEW
SS316 is a 316 stainless steel wire specifically designed for arc spraying. It produces a dense, well-bonded coating with excellent machinability and wear and corrosion resistance. SS316 is widely used for machine element repair, dimensional restoration and wear resistance applications. It has high shrink characteristics and should not be used for coatings over 0.075 inches thick.
TYPICAL DEPOSIT CHARACTERISTICS:
Þ Typical Hardness: HRB 90-95
Þ Bond Strength: 6750 psi
Þ Deposit Rate: 10 lbs/hr/100A
Þ Deposit Efficiency 75%
Þ Wire Coverage: 0.8 oz/ft2 / mil
Þ Surface Texture * Variable
Þ Machinability Good
* Depends on air pressure used
SURFACE PREPARATION
Surface should be clean, white metal, with no oxides (rust), dirt, grease, or oil on the surface to be coated. Note: It is best not to handle surfaces after cleaning.
Recommended method of preparation is to grit blast with 24 mesh aluminum oxide, rough grind, or rough machine in a lathe.
APPLICATION
Þ Parts Restoration
Þ Rams
Þ Food Industry Rolls
SPECIFICATION
316 SS
NOMINAL CHEMICAL COMPOSITION (wt%)
| Cr | Ni | Mn | Si | Fe | Mo |
| 17.0 | 12.0 | 2.0 | 1.0 | Bal | 2.5 |
RECOMMENDED SPRAY PARAMETERS:
| Diameter | Air Pressure | Voltage | Amperage | Standoff |
| 1/16” (1.6mm) | *50-60 psi | *28-30 | *100-200 | *4-6 in (10-15 cm) |
* Parameters are typical and may vary depending on equipment used. Contact your equipment manufacturer for optimum spray parameters
STANDARD SIZES & PACKAGING:
| Diameter | Packaging |
| 1/16” (1.6mm) | 15kg/spool |
